Informácie o produkte
Odvez tovar na nákladnom vlaku LEGO® City!
- VIP body
Nalož výkonný LEGO® City 60198 Nákladný vlak a doruč tovar včas! Túto štýlovú stavebnicu LEGO City s rušňom s pohonom možno ovládať diaľkovým ovládaním Bluetooth s 10 rýchlosťami. Obsahuje prístupnú kabínu rušňovodiča, vozeň so žeriavom s otočným a vysúvacím ramenom, vozeň s 2 kontajnermi, vozeň s guľatinami plus obrnené vozidlo s otváracími dverami a vysokozdvižný vozík s otváracou ochrannou klietkou a zdvíhacími vidlicami. Táto štýlová stavebnica vlaku LEGO obsahuje tiež uzavretú okrúhlu trať so 16 zaoblenými a 16 rovnými koľajnicami, výhybku s pákou plus riadiace stredisko s rebríkom, 2 zostaviteľné palety s bankovkami, zlaté tehličky, snežný skúter a 6 LEGO minifigúrok.
- Súčasťou stavebnice je 6 LEGO® minifigúrok: 4 železniční pracovníci, pracovník bezpečnostnej služby a zlodej.
- Vlak obsahuje rušeň s pohonom a diaľkovým ovládaním Bluetooth s 10 rýchlosťami, pantograf na otváracej streche a kabínu rušňovodiča s ovládacím panelom.
- Ďalej obsahuje vozeň s guľatinou, vozeň so žeriavom s otočným a vysúvacím ramenom a vozeň s 2 kontajnermi s hákmi na streche na nakladanie a priestorom na palety.
- Zahŕňa riadiace centrum s rebríkom a signálnymi svetlami, uzavretú okrúhlu trať pre hračkársky vlak so 16 zaoblenými koľajnicami a 16 rovnými koľajnicami, výhybku s pákou, transportér na prevoz peňazí s otváracími dverami a vysokozdvižný vozík s otváracou ochrannou klietkou.
- Medzi doplnkami nájdeš kľúč, 12 zlatých tehličiek a 4 bankovky plus 2 zostaviteľné palety, 3 guľatiny a snežný skúter.
- Otvor strechu a získaj prístup k detailne prepracovanému priestoru rušňa.
- Ovládaj nákladný vlak s diaľkovým ovládaním Bluetooth s 10 rýchlosťami.
- Zdvíhaj a nakladaj guľatiny na vozeň pomocou otočného ramena a háku žeriava.
- Zatlač páku na výhybke a preraď vlak na inú koľajnicu na nakladanie alebo vykladanie nákladu.
- Nalož palety do kontajnerov pomocou vysokozdvižného vozíka a potom ich žeriavom zdvihni a nalož na vozeň.
- Zlož koľajnice do rôznych konfigurácií na naloženie alebo vyloženie nákladu po meste.
- Tento produkt vyžaduje batérie (nie sú súčasťou balenia). Typ a množstvo sú uvedené na obale produktu.
- Dodané diaľkové ovládanie Bluetooth nie je kompatibilné so staršími stavebnicami vlakov LEGO® ovládanými infračerveným diaľkovým ovládaním.
- Nákladný vlak meria celkovo viac než 11 cm na výšku, 82 cm na dĺžku a 6 cm na šírku.
- Rušeň meria viac než 11 cm na výšku, 27 cm na dĺžku a 6 cm na šírku.
- Vozeň s guľatinou meria viac než 5 cm na výšku, 15 cm na dĺžku a 6 cm na šírku.
- Vozeň so žeriavom meria viac než 10 cm na výšku, 22 cm na dĺžku a 5 cm na šírku.
- Vozeň s kontajnermi meria viac než 9 cm na výšku, 18 cm na dĺžku a 5 cm na šírku.
- Obrnený transportér meria viac než 6 cm na výšku, 15 cm na dĺžku a 6 cm na šírku.
- Riadiace stredisko meria viac než 21 cm na výšku, 8 cm na šírku a 12 cm do hĺbky.
- Vysokozdvižný vozík meria viac než 7 cm na výšku, 5 cm na šírku a 12 cm do hĺbky.
- about 7 hours agorating.prefix5rating.postfix60198Snailsport | 35-44I would recommend this to a friend!Purchased for: SelfBrilliant set with the new features which means less wiring in the train unit and if you use your phone to control it less batteries needed. Currently have it set up and running in my living room tied in with 1x 7895 1x 7499 and 60098 heavy haul train set. I know want to purchase the new battery/receiver for the older train. I have also added set 60169 to the setup which ties in well.Play Experiencerating.prefix5rating.postfixLevel of Difficultyrating.prefix3rating.postfixValue for Moneyrating.prefix5rating.postfixBuild Time: 5 hrsBuilding Experience: Expert LEGO builderWas this helpful?55
- 12 days agorating.prefix4rating.postfixGreat Train Set, get Powered-Up!mbellis | 45-54I would recommend this to a friend!Purchased for: SelfThis train set has great play value. Four train vehicles, two road vehicles, removable loads and the signal box, buffers and level crossing that make the railway scene. It is one of the best LEGO train sets I have bought since 1990. As a long-time fan I still like the versatility of the earlier 12V trains even though the power technology has developed since that era. As an adult fan and an engineer I bought two of these train sets so that I could test the new Powered-Up technology. Linking one handset to one hub was straightforward, using the instructions in the set. Linking two hubs to one handset was more difficult but there are instructions in the LEGO community forum online and I got there after some trial and error. Once you have linked one hub to the handset, turn it off, link another and then turn the first one on again. This seemed to work most of the time. Once it had worked I could move the hubs between the 5 channels happily, having them either on the same channel and acting together, or on different channels with the handset switching between the two active channels as its green button was pressed. I wonder if I could have 2 or more hubs on each of the 5 channels, for double-header trains? Is the limit 5 channels (with multiple hubs per channel) or 5 hubs in total? With two similar sets containing minifigs I often change their parts round in the second set so that I have more unique figures. Trains look better with more than one of each wagon too. The log wagons are great as a pair. The container wagons now have the two snowmobiles on one and the two bank boxes on the other. The cranes have to face the same way as a pair because their jibs stick out over the end of the wagon; that's a shame because I liked the idea of them as a pair of breakdown cranes, where they would usually run jib-to-jib. I look forward to getting the 88005 Powered-Up light bricks, which are now available. I hope there will be some provision to use previous motors and lights with the new hub, since the non-smart ones need only 2 of the 6 wires to be connected. I would also like to connect NXT/EV3 parts to the Powered-Up hub. Apart from the connector being different, is the electrical interface the same? What the Powered-Up system really needs is a LiPo battery multiplexer hub to add to the Bluetooth hub that is in the train sets. Another 4x8x3 box would contain two LiPo cells (like 8878) and the charging circuit, and would have four Powered-Up ports, 2 on each end. A flying lead would plug into the Bluetooth hub to get the motor drive and smart signals. The multiplexer hub would power the 4 ports together from its LiPo battery, using the signal from the Bluetooth hub. The smart motors would behave as they do with an NXT/EV3 multiplexer. A tiny switch (used in some Power Functions items) would allow the 2 ports on one end to have reversed motor drive compared to the others. This would enable use in a train, where two train motors connected to either end of the multiplexer hub would turn in opposite directions when the tiny switch was set to "reverse". With the motor wires both towards the middle of the locomotive (avoiding the couplings and finding the holes in the baseplate), both bogies could be powered, which is what adult fans often do with 9V or PF trains. This item would go a long way to helping adult fans with the transition from Power Functions by providing a way to power multiple motors from the same receiver hub. It would also use rechargeable LiPo power for the motors, keeping the AAA cells for only the Bluetooth receiver and a low-current signal to the multiplexer hub; this would make the AAA batteries last as long as with a light brick and would be good for the environment. As an electronics and safety engineer I would be happy to help further under NDA if you like. Please would you keep all Powered-Up products versatile, so I don't need a mobile phone for any of them. I'm happy with the handset so far. I really wish the couplings didn't have to have as much of the buffer beam as they do. I know it was done to prevent swallowing but this did not need the full width. I build larger trains and the 6-wide buffer beams are not useful for that; they are also a substantial part of the cost of a train set. One real problem I do have with the set is that the locomotive snowplough-buffer beams scrape on the track. This should have been designed-out during product testing. In reality no-one has a perfectly flat floor, table or railway layout. Those who buy more train sets like to make hills and bridges to go over other tracks. This means even the snowplough buffer beams need good ground/rail clearance. Please would you redesign the piece with at least 1mm more clearance and send me 4 of them for my 2 locos. Thanks.17. augusta 2018Emily, Customer ServiceHey there! Thanks for your review. To answer your question about the number of hubs - each channel can have two hubs (one with a motor in port A, one with a motor in port B). With five channels, that means you can run up to 10 trains from a single remote!Play Experiencerating.prefix4rating.postfixLevel of Difficultyrating.prefix2rating.postfixValue for Moneyrating.prefix3rating.postfixBuild Time: 3 hrsBuilding Experience: Expert LEGO builderWas this helpful?45
- 1 day agorating.prefix2rating.postfixIncredibly disappointedOldSkool | 45-54Purchased for: SelfThe train itself is great. This set is essentially a 2018 version of the old 7939 Cargo Train from 2011 and as such, has all the detail, features and accessories of the original City Cargo train, but brought up to date. What lets this down really badly is the nightmare that is the new Powered Up! control system. 'Out of the box', it doesn't work properly. Yes, the supplied controller allows you to control the train. But, I also have the 60197 Passenger Train and the two controllers do not 'talk' to more than one train. The Bluetooth pairing is dodgy at best and not being able to use one controller to control both trains, one on each channel, is a real pain. According to several forums, a firmware update is available which does fix some issues, but this only works with an 'app' for Android or i-OS devices, neither of which I own or intend to own. So unless you are buying a single train or you have a compatible smart device, this is not for you. I have replaced both sets of Powered Up components with Power Functions items and now the trains not only work as expected but will co-exist with all my existing trains on the same controller(s). LEGO....please respect the fact that there are those of us older fans who are more than happy to spend £300 in one purchase of two train sets, but do not own or wish to own 'smart' devices. At least give us a PC-compatible method of controlling these trains or a way of updating the firmware without needing an i-Phone or tablet! I am also concerned that the battery life is nowhere near as good as it was with PF...the constant bi-directional communication between hub and controller eats batteries, even without the motors running.
Response from LEGO SHOP7. augusta 2018Emily, Customer ServiceHi there. I'm sorry to hear that you've had some trouble getting both your trains connected. It is possible to run two trains at the same time from one remote, but the process can get just a bit tricky since it requires several steps. You'll want to make sure that each train has its motor plugged in to a different port. Connect the first train, then disconnect it. After that, connect the second train (don't disconnect!). Once that's done, reconnect the first train. Both trains will then be connected to the same remote! If you'd like to change which channels they're on, you can just press the button on the Hub. If you need a hand getting your trains connected, our Customer Service team is happy to help. You can get in touch at LEGO.com/Service.Play Experiencerating.prefix2rating.postfixLevel of Difficultyrating.prefix3rating.postfixValue for Moneyrating.prefix2rating.postfixBuild Time: 2 hrsBuilding Experience: Expert LEGO builderWas this helpful?25
- 9 days agorating.prefix5rating.postfixA present for a little boyThoriun | 35-44I would recommend this to a friend!Purchased for: Friend or Family Member's ChildWhen my older brother talked with me about the family gathering to purchase such an expensive Lego for a little bopy's 4th birthday, I was ready to do my part. Being a lego fan for almost 37 years (i'm 40, so for how long I remember myself!), and being the main guilty party that my nephews and niece for loving lego (they are 4, 7 and 9). For several reasons the build process was up to me and my older brother, but the look on the Pedro's (the birthday boy) face meant we need to get it build on a fast pace, and it was worthy! As soon as the train was build he started to prepare the tracks to race with the other train set that he already has (the 60197) . The story been told now for the review... although a bit expensive, we can see where the money goes, with over 1200 parts and a great design with several features on all sections it means that the playability will last for a long time. Ideas for a near future (let's hope it happens) It would be great to see a train station , maybe inspired on the train station on the harry potter 2019 train, something looking XIX century arquitecture of 1960's one, with 2 our 3 train tracks (like a normal train station)! The second idea would be a cargo truck with several containers for the train. Best regards AdrianoPlay Experiencerating.prefix4rating.postfixLevel of Difficultyrating.prefix3rating.postfixValue for Moneyrating.prefix4rating.postfixBuild Time: 3 hrsBuilding Experience: Advanced LEGO builderWas this helpful?55