Hard to find
Star Wars™LEGO®


Available now
Limit 5


Product Details

Build the ultimate LEGO® Snowspeeder!

VIP Points


Own your own LEGO® version of a <i>Star Wars</i> classic—the T-47 Snowspeeder, featuring opening airbrakes, opening cockpit, rotating rear gun and 2 classic minifigures.

See More Features

Collect a true Star Wars classic: the T-47 Snowspeeder. This LEGO® interpretation of the iconic airspeeder that fans will remember from Star Wars: Episode V The Empire Strikes Back has all the details you'd expect, including opening airbrakes, rotating rear gun, and an opening cockpit with space for the included Rebel Snowspeeder Pilot and Rebel Snowspeeder Gunner minifigures. This model also comes with a display stand and fact plaque, so it can take pride of place in any LEGO Star Wars collection.

  • Includes 2 minifigures: a Rebel Snowspeeder Pilot and a Rebel Snowspeeder Gunner.
  • Features intricate, authentic detailing, opening airbrakes, rotating rear gun and an opening cockpit with space for the 2 included minifigures.
  • Attach the Snowspeeder to the stand with fact plaque to display it.
  • Impress your friends with this amazing recreation of a classic Star Wars Snowspeeder.
  • Includes 2 blaster pistols.
  • Accessory elements include electrobinoculars, a Snowspeeder Pilot helmet and a Snowspeeder Gunner helmet.
  • Snowspeeder on display stand measures over 8” (21cm) high, 15” (39cm) long and 11” (29cm) wide, and over 4” (11cm) high without stand.
Snowspeeder™ is rated 4.3 out of 5 by 81.
Rated 4 out of 5 by from Challenging build I have recently found my affinity for building Legos and have built other UCS sets -Slave I -Tie Fighter -Sandcrawler Overall, the Snowspeeder is a good build and the finished product looks exceptional, but I do have a few complaints: 1. The front end is EXTREMELY fragile...I had to rebuild it twice when I was working on the back end and it fell apart bc there are very few places to hold it firmly once the wings are on. It def needs to be beefed up. 2. The little silver "grill" pieces on the underside would not stay on bc the ship really can only be held by the back end and the slightest rub would pop them of, it's hard to get them back on once the wings are attached w/out the risk of damaging something else. 3. The stand is a bit suspect bc of the weight of the ship, it tends to lean a bit perilously so I had to add some support. 4. Speaking of the stand, with the ship mounted sideways as pictured and slanted forward, it is very difficult to see the minifigs and info placard. That is a big draw of the UCS builds...almosr like the stand was an afterthought. Overall, the build was enjoyable, but it was also VERY frustrating at times. The "playability" factor is virtually nil as this is truly a display piece.
Date published: 2017-05-13
Rated 5 out of 5 by from 75144 Snowspeeder UCS – Rogue Two This Ultimate Collector Series (UCS) Snowspeeder #75144 was a very fun build and the model looks great! I am impressed with the weight and design. As with any ship which has near identical wings I was pleased with how much fun both wings were to build. They did not feel redundant like tie fighter wings are. The cockpit has a newly designed windshield just for this set. It blends nicely with the side windows. When you swivel the rear gun it moves the gunner’s handles. There is a retractable landing gear, although the model is a bit front heavy so the landing gear is more for looks than functional in my opinion. The canopy opens giving clear view of the cockpit which has a lot of detail. The air brakes (top and bottom) are both movable. The top are opened by turning the engines. The bottom air brakes can be positioned manually. However, they both look just like the movie. The underside wings have intake fins. It’s a nice detail if looking underneath and marks to LEGO for thinking of the whole model and not just the top. The guns are the proper length and maintain their angle through the pylon in the middle of the wing. The nose and wings are not blocky but use plates all around. The rear cooling fins are one of my favorite parts of this model; they genuinely look like cooling fins. Inside the cockpit there are a number of stickers on the front, both sides, and in the back which adds a level of detail not achieved by typical printed pieces. The two minifigures are basically identical except the pilot helmet vs the gunner helmet. The pilot helmet is blackish and thus far consensus says it belongs to Zev Senesca (Rogue Two in Empire Strikes Back). Sadly, he was killed during the Battle on Hoth. However, there is debate whether his helmet in the movie is a very dirty white or actually grey. The symbols around the ears is what identifies it as belonging to Zev. What makes the minifigures unique to this set only is the printing on both arms. Before I get to pros and cons I want to talk about stickers. There are a lot of them… 31 to be exact. I know a lot of people complain about a high number of stickers, but stickers do add a level of detail not otherwise attainable. Otherwise, LEGO is printing a lot of unique bricks for this one set thus increasing the set’s cost. However, application of the stickers adds a level of complexity to the set so it’s not just the build but how well you apply the stickers to complete the build. However, I have a request for LEGO: Dear LEGO, If you’re going to produce stickers with writing, I suggest doing what model makers do – the stickers with writing should have a clear background. This way the sticker does not modify the look of the piece it is covering. By coloring the background of the sticker, the sticker becomes more obvious, especially when the white of the sticker is a bright white but the white LEGO piece is not and will eventually fade at a different rate than the sticker. Just a thought. Pros: Excellent rendition of Rogue Two’s T-47 Snowspeeder from The Empire Strikes Back. The stickers add a level of detail not otherwise achieved inside and out. The harpoon gun looks great. The movement of the gun also moves the gunner’s handles inside the cockpit - very cool. I do wish there was a “harpoon” of some kind loaded into the end of the gun. The mounting and angle of the main guns is great and looks very authentic to the movie. The mounting is very stable. Movable air brakes on the top and bottom are very nice for display purposes. To open the top, turn the engines – very cool. The addition of a landing gear adds to the authenticity, even if it is not as usable as I would have liked. Two minifigures with unique printing on their arms. The new helmet for Zev is very nice. Although it is debatable if it is actually blackish or just a very dirty white, it’s a nice shout out with a unique helmet. Cons: I found the chairs a little on the flimsy side when I was installing them. It’s too bad there isn’t more room to reinforce their backing. Installation took a couple of tries to get it right without them coming apart. Although, this might have been just me forcing them in place. They do have a tight fit, which is nice. I’m not sure if the landing gear is really a con or not. It’s not as usable as I hoped, but it looks very realistic. In conclusion: If you’ve been debating about investing or holding onto 10129 UCS Rebel Snowspeeder or buying this new one, 75144 UCS Snowspeeder, here are a couple of thoughts about this new UCS Snowspeeder #75144: - Movable (position-able) air brakes – top and bottom (not found on 10129). - New unique windshield with a smooth transition to the side windows making for a great looking cockpit (not found on 10129). - Plate nose, wings, and sides providing a much less blocky look than 10129. - Intake fins “inside” the wings (definitely not found on 10129). - The rear cooling fins are more accurate to the movie using plate build vs the blocky build of 10129. - Two unique minifigures with printing on their arms and a new unique helmet for the pilot, Zev Senesca. (10129 does not have minifigures). - Yes, people might complain about the 30+ stickers, but the stickers add a level of detail not otherwise attainable or seen on 10129. AND placement of the stickers adds a level of difficulty to this set. Overall I am very pleased with this set and the build. Now if I can just keep my son from playing with it. Nice job LEGO, definitely worthy of the UCS badge!
Date published: 2017-05-11
Rated 5 out of 5 by from One of the best sets I ever purchased This set is definitely amazing and fun to build. It does have a little repetition but not as much as most sets I've built. It displays amazingly and looks great among my collection. The price was great for the amount of pieces despite the Disney licensing. Overall, great set.
Date published: 2017-05-05
Rated 4 out of 5 by from Looks great but may be impractical to play with This is a review for the UCS T-47 Snow Speeder. First of all I have to say that Lego does a great job of making this set look very much like the real deal from the movie. The experience building the set was straight forward but being symmetrical you kinda feel like once you get into building each wing that you have done it all before. It took 6 hrs to build which was fair enough for the amount of pieces and detail of this set. The price is similar to other UCS sets released in the last few years. Price is high so this should be more for the collectors than a set for kids to play with. The only thing that really disappoints is how flimsy sections of this model really are. The big question is where to pic up this model without destroying something is paramount. You cant grab this by the front/nose of this speeder or it will break away. It is only held to the rest of the model by two ball and socket joints and 8 studs. There is not enough reinforcing to make this more robust. I can see the need for this design as the angles of this ship are not convenient for Lego parts. The second area that I dare not touch are the radiator fins. The left and right sections of the fins are only held in place by 2 pegs each. For greater accuracy I can see why this was done but the pegs are the style that you use for helicopter blades (peg onto a four stud base). Two of these do not hold the fins in place if you decided to pick up your model from the rear. So you will have a frustrating time handling this model from the front or the back. Otherwise it is a good looking Lego set but this is more of a build and leave alone set. Definitely do not let the kids handle this. It will not be their fault if it breaks as I stated that parts of this model are flimsy. Anyways this model sits next to my UCS Tie Fighter.
Date published: 2017-12-31
  • y_2018, m_2, d_23, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_81
  • loc_, sid_75144, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_lego